Digital Lynx 10S

The Digital Lynx acquisition system is the state of the art in low noise, high density electrophysiology recording systems. Expandable from 32 to up to 320 acquisition channels, the Digital Lynx 10S will allow your Digital Lynx to grow as your experiments do. Multiple Digital Lynx 10S units can even be connected together with a single 1MHz timestamp clock, allowing almost unlimited acquisition channel expansion. A built-in 16 bit TTL input port provides experiment monitoring without the need for any additional hardware. Simultaneous sampling of all TTL bits and acquisition channels at 32KHz ensures accurate timestamping of all data. Only a single fiber optic cable is needed to connect the Digital Lynx to a PC, not only making setup quick and easy, but also providing electrical isolation for your test subject.

The Digital Lynx works with the Cheetah Data Acquisition software to offer unparalleled flexibility in signal filtering and recording options. Software based filtering allows you to record and filter a signal at different frequencies with no additional hardware or external connections. And, because all signals are sent to the PC unmodified, you can use recorded data to repeat your experiment with the test subject completely disconnected from the system.

Digital Lynx 10S configurations include everything you need to get your experiment running quickly and easily. These base configurations can also be customized to suit the requirements of your particular experiment.