|
|
Digital Lynx 4S - 16 Channel ConfigurationAll Digital Lynx 4S configurations feature:
DigitalLynx4S-Z800The Digital Lynx 4S encompasses the chassis, backplane, control board, power supply and optical ethernet connection for the Digital Lynx acquisition system. Built in features include a 16 bit TTL input port and a clock synchronization connection for linking multiple systems. The 4S version of the Digital Lynx has a four board backplane that can support from 32 up to 64 acquisition channels. AC or DC coupled Input Boards, required for signal acquisition, and Digital Reference Selectors are sold separately. This package also includes an HP Z800 PC with complete acquisition system setup, software installation and testing prior to shipment. DL Input32-ACThe Digital Lynx AC Input board adds 32 AC coupled acquisition channels to a Digital Lynx acquisition system. Each input board digitizes incoming analog data at 32KHz with a very low 1.3 µV of noise. AC coupling allows for recording of signals between 0.16Hz and 8.5KHz, eliminating DC artifacts in neural signals. Input boards can be paired with Digital Reference Selectors (DRS) for software controlled signal referencing. DRS-36A Digital Reference Selector (DRS) is paired with an Input board to provide software controlled referencing for Digital Lynx acquisition systems. Each DRS is capable of selecting up to eight signals that can be used as references for each of the 32 acquisition channels of an Input board. A global reference connection allows for sharing of references between DRS boards using the included global reference cable. All reference selections are made using the Cheetah Data Acquisition software. HS-18-CNRThe HS-18 is a preamplifier headstage which provides 18 channels of unity gain amplification as well as one reference line and one buffered ground. Due to its lightweight design, a Cooner wire tether comes attached to the headstage with the length customized to your needs. It is designed to work with the EIB-18 family of electrode interface boards. EIB-18The EIB-18 is the Electrode Interface Board that provides the signal connection between electrode wires and a Neuralynx Headstage Pre-amplifier (HS-16, HS-18). The EIB-18 also provides 2 stimulus channels. EIB Pins Large 500Large gold pins used for making the connection between the electrode and Electrode Interface Board. Quantity 500.
|
