Adapters

Adapter to plug two HS-8, HS-16, or HS-18 to one DRS or ERP-27

This adapter connects Adtech electrodes to the Neuralynx EIB-36 Human interface.

This adapter connects a EIB-54Kopf with two Neuralynx Headstage-36's.

The ADPT HS-27 to ERP-27 is designed to give the user the flexibility to connect any series of Headstage 27 (HS 27, HS27M, and HS27 Micro) to interface with a Digital Reference Selector(DRS), Digital Lynx Input Board, or ERP-27.

MDR50 tether adapter board to ERP-27 tether connector which includes 8 extra CSC Banana plugs

This adapter is used to connect a HS-27 headstage to PSR-36 Commutator.

This adapter has a MDR50 connecter on one side and a Hirose Flex connecter on the opposite side. This adapter is used to connect the Neuralynx Headstage 36 Flex cable to a Digital Reference Selector(DRS), Digital Lynx Input Board, or ERP-27.

This adapter has a MDR50 connector on one side and a Omnetics connector on the opposite side. This adapter is used to connect the Neuralynx Headstage 36 Fine Wire Tether (FWT) cable to a Digital Reference Selector(DRS), Digital Lynx Input Board, or ERP-27.

This adapter board connects a HS-36FWT (Fine Wire Tether) headstage to the bottom of the PSR-36-x commutators' Flex Circuit Cable. This adapter passes 36 Electrodes, 4 References, Power and Stimuluation lines.

This Hirose Jumper board is used to connect 2 flex ribbon cables together.

This adapter board allows Mill-Max Electrode connections to be input to a HS-36. The 44 pin Mill-Max connector has the same signals as on a standard EIB-36. This includes: 32 channels, 4 references, grounds, and the two differential stimulus channels.

This adapter connects a Neuralynx HS-36 headstage amplifier to 30 channels of a Gray Matter Research 60 channel semi-chronic microdrive (SC60-1).